SlingFin - NFT Ultralight Flat Tarp

The flat tarp is the quintessential multi-purpose shelter, prized for its versatility, simplicity, and roominess. A flat tarp can be adapted to just about any set of conditions by changing the pitch, and is equally at home as an emergency shelter on a day-long ski tour or as a group hangout for cooking on a rainy backpacking trip.

Our NFT is a 9.5' x 10' flat tarp that addresses several qualms we had with most flat tarps by adding subtle catenary curves around the long edges, which make for a gorgeous, taut pitch in the A-frame configuration, unlike straight-edged tarps, which tend to flap due to bias stretch in the large side panels. However, we didn't add a caternary cut to the ridgeline seam so your pitching configurations wouldn't be limited to an A-frame. We also added cord tensioners at both ends of the guylines to make trekking pole positioning straightforward and quick.

Our 10D NY66 ripstop sil/sil fabric is perfect for the NFT. It has already been field-proven in our Portal, SplitWing, and 2Lite. It's ludicrously packable, has a terrific strength-to-weight ratio, absorbs less water (and sags less) than PU-coated fabrics, and has astounding UV resistance.

The NFT comes loaded with 6 pre-attached 1.5mm reflective Dyneema guylines, 4 accessory guylines, and 12 of the larger 8" long DAC J-stakes so you can pitch the NFT anywhere, any way.

With its packability, light weight, and practically unlimited pitch configurations, we'll think you'll agree... this is a Nice Flat Tarp.

Features:

• Generously sized at 9.5' x 10'
• Compatible with SplitWing Mesh Body and most bug tents
• Tons of tie-outs for numerous pitch types
• Catenary cuts along the edges for taut pitching
• Includes 10' pre-attached ridge guylines and 8' pre-attached corner guylines
• 4 additional 8' guylines included in accessory sack
• Includes 12 8-inch DAC J-stakes
• Cord tensioners at both ends of all pre-attached guylines
• 3 long-edge perimeter pull outs
• 4 mid-panel guy loops (two on each side)
• 2 mid-ridge line guy loops
• 20D PE-coated reinforcements 

Specs:

• Minimum Weight (tarp only): 12.3oz (349g)
  
• Minimum Weight (including pre-attached guylines): 13.6oz (386g)
  
• Packaged Weight: 1lbs 5.8oz (618g)
• Dimensions: 120" x 115" (3.05m x 2.92m)
• Packed Size (uncompressed): 4" x 4" x 9" (10cm x 10cm x 23cm)
• Total Area: 95.8 sq ft (8.9 sq m)
• Guy Out Loops: 6
• Perimeter Pull Out Loops: 6
• Included Guylines: 6 pre-attached, 4 additional (1.5mm Dyneema core reflective cord)
• Included Stakes: 12 DAC J-Stakes size M (8"/20cm)
• Tarp Fabric: 10D Nylon 66 ripstop sil/sil
• Reinforcement Fabric: 20D Nylon ripstop sil/PE