High Tail Designs - Ultralight Rain Mitt "For The Trees"

**GLOVE PULLS AND WRIST SHOCK CORD ARE NOW BLACK.  SOME HARDWARE HAS CHANGED**

Perfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  
    
    *Due to dye-sublimation, colors may vary slightly.

    Designed, printed and sewn in Philadelphia, PA 

    Pattern by Caman "Bones" Skelton

Care Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.
        Hand wash with a gentle soap.  
        Do not iron.  
        Do not wring.  
        Drip-dry in shade.
        Do not bleach.

Features:

• Extremely Water-Resistant (as close to waterproof as you can get without welded seams)
• Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)
• One-handed wrist cinch fastener to tighten/loosen each mitt
• Fully-Taped Seams
• Large glove pull on each mitt for ease of donning
• Shock cord wrist cinch to prevent water ingress
• Loops for attaching mitten hooks
• Unique Colorways
• Ultralight Construction

Specs:

• Dimensions:
• Sm/Md: ~ 11.4" x 7.4"
• Lg/Xl: ~ 12.2" x 7.5"
• Weight:  
• Sm/Md: 1.07 oz / 30 grams
• Lg/Xl: 1.21 oz / 34 grams
• Materials:
• Sublimated 2.92 oz/sqyd Dyneema Hybrid Fabric
• Sublimated 1.0 oz/sqyd Dyneema Composite Fabric
• 3M 9485pc Dyneema Tape
• 1/8" Shock Cord
• 1/2" Firm Nylon Grosgrain Ribbon
• 2 mm Neon Yellow Spectra Glove Pull
• Cord Toggle
• Cord Pull

Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm/Md size will fit most people with a base measurement of 6.5" - 7.75". A Lg/Xl size will fit most people with a base measurement of 7.5" - 8.25".