High Tail Designs - Ultralight Rain Mitt "Ink"
High Tail Designs - Ultralight Rain Mitt "Ink"
Perfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry. Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.
*Due to dye-sublimation, colors may vary slightly.
Designed, printed and sewn in Philadelphia, PA
Care Instructions:
- Clean dust and dirt from Mitts before storing. Store out of direct sunlight and moisture.
- Hand wash with a gentle soap.
- Do not iron.
- Do not wring.
- Drip-dry in shade.
- Do not bleach.
Specs:
-
Dimensions:
- S/M: ~ 11.4" x 7.4"
- L/XL: ~ 12.2" x 7.5"
-
Weight:
- S/M: 1.07oz / 30g
- L/XL: 1.21oz / 34g
Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger. This is the base measurement we use for sizing.
S/M size will fit most people with a base measurement of 6.5" - 7.75".
L/XL size will fit most people with a base measurement of 7.5" - 8.25".